HARSLE Used Four-rod Sheet Metal Roller 40x2500mm Sheet Metal Roller
Funciones para HARSLE Rodillo Chapa Cuatro Varillas 40x2500mm Usado
- This machine is a hydraulic four-roller bending machine and is used to do pre-bending the end of the plate, rolling it into the round cone and other shapes. Four roller bending machine is recognized as the fastest, most accurate, most likely to use the machine.
- The rest of the straight edge segment is greatly reduced-only one end of the board is fed. There is also the source of its outstanding pre-bending capacity: the clip point completely fell on the edge of the plate.
- Automatic feeding material-with the feed side of the opposite side of the rear roll can be used as a rear stop material, the plate immediately into a right angle parallel position, sheet metal flat easy, the single operation can.
- After the correction of the plate, the upper and lower parts of the middle of the clip to the middle of the clamp. So it is safe and easy to operate, there is no risk of sheet slippage.
- ln the front of the plate, the diameter of the cylinder can be made immediately. Because only in the machine tool side need to enter the space can be used, which means that the operation of the machine tool is less space.
- After the cylinder volume is made, the end of the roll is made. A cylinder by bending forming.
- Taper coil is easy, can be rolled to the biggest angle of a 30-degree cone. The side roll is inclined to determine the angle of the cone, and the center of the lower center can also tilt, clamp and drive plate.
- In the rolling process, ensure the plate clamping and driving, four rollers bending machine is the single most applicable on the NC and CNC systems through effective control of the bending machine.
- In the cylinder after rolling, rolling on the tail edge (four roller bending machines can bend ahead, can also bend back). A cylinder by bending forming.
Información de la empresa
La empresa VIGERT coopera principalmente con grandes fábricas, recuperación fija de máquinas dobladoras usadas, maquinas de corte, máquina de prensa hidráulica usada y muchas otras maquinarias y equipos, ingenieros profesionales para probar y depurar la máquina, calificar y luego mantener y reparar la máquina, y finalmente proporcionar a los clientes máquinas usadas de alta calidad no menos que máquinas nuevas.
La compañía VIGERT tiene un gran alcance comercial y una amplia cobertura, abogar por la cooperación de beneficio mutuo, convertir los desechos en tesoros y hacer que los activos inactivos se muevan, es su búsqueda eterna y la mía.
After Sales Service for Used Sheet Metal Roller
- Ofreceremos una garantía de un año para todas las máquinas usadas VIGERT para que los clientes no se preocupen por la calidad y el mantenimiento.
- VIGERT puede ofrecer el servicio de renovación para todas las máquinas, puede ayudar a los clientes a eliminar la preocupación por los procedimientos de importación.
- VIGERT cuenta con un equipo de soporte técnico experimentado para ayudar a los clientes a resolver los problemas de cualquier máquina en poco tiempo.
- VIGERT se ha establecido durante más de 15 años y ha prestado servicios a más de 10.000 clientes en todo el mundo. Nos hemos ganado la confianza de todos.
Antony –
Item is as described, well built, except some scratch on the machine, probably because of packaging purposes, but a little adjust will fix that! Delivery was prompt. Great machine for bending and making circles with round and flat stock.