Used HARSLE Four-rod Sheet Metal Roller 40x2500mm

HARSLE Used Four-rod Sheet Metal Roller 40x2500mm  Sheet Metal Roller

Features for HARSLE Used Four-rod Sheet Metal Roller 40x2500mm

• This machine is a hydraulic four-roller bending machine and is used to do pre-bending the end of the plate, rolling it into the round cone and other shapes. Four roller bending machine is recognized as the fastest, most accurate, most likely to use the machine.
• The rest of the straight edge segment is greatly reduced-only one end of the board is fed. There is also the source of its outstanding pre-bending capacity: the clip point completely fell on the edge of the plate.
• Automatic feeding material-with the feed side of the opposite side of the rear roll can be used as a rear stop material, the plate immediately into a right angle parallel position, sheet metal flat easy, the single operation can.
• After the correction of the plate, the upper and lower parts of the middle of the clip to the middle of the clamp. So it is safe and easy to operate, there is no risk of sheet slippage.
• ln the front of the plate, the diameter of the cylinder can be made immediately. Because only in the machine tool side need to enter the space can be used, which means that the operation of the machine tool is less space.
• After the cylinder volume is made, the end of the roll is made. A cylinder by bending forming.
• Taper coil is easy, can be rolled to the biggest angle of a 30-degree cone. The side roll is inclined to determine the angle of the cone, and the center of the lower center can also tilt, clamp and drive plate.
• In the rolling process, ensure the plate clamping and driving, four rollers bending machine is the single most applicable on the NC and CNC systems through effective control of the bending machine.
• In the cylinder after rolling, rolling on the tail edge (four roller bending machines can bend ahead, can also bend back). A cylinder by bending forming.

Company information

VIGERT company mainly cooperates with large factories, fixed recovery of used bending machines,  shearing machines,  used hydraulic press machine and many other machinery and equipment, professional engineers to test and debug the machine, qualified and then maintenance and repair of the machine, and finally provide customers with high-quality used machines no less than brand new machines.

VIGERT company has a large business scope and wide coverage, advocating win-win cooperation, turning waste into treasure, and making idle assets move, is your and my eternal pursuit.

After Sales Service for Used Sheet Metal Roller

1. We will offer a one-year warranty for all VIGERT used machines so that customers will have no worry about the quality and maintenance.
2. VIGERT can offer the renewal service for all machines, it can help customers to remove the worry about the import procedures.
3. VIGERT has an experienced technical support team to help customers solve any machines’ issues in a short time.
4. VIGERT has been established for more than 15 years and served more than 10K customers all over the world. We have won the trust of all of them.